Number: 3984 |
|
| |
| Category: |
5-color offset press |
|
| Manufacturer: |
Sakurai |
| Model: |
566 SD |
| Built: |
2006 |
| Size: |
660 x 508 mm |
| Impression: |
ca. 85 mio. |
| Status: |
Dismantled |
| Test: |
Test Not Possible, Machine Is Dismantled |
| Location: |
Germany |
| Availability: |
Immediate |
| | |
| Machine: | 5-color offset printing press |
| Manufacturer: | - Sakurai / Japan |
| Model: | - 566 SD |
| Format: | - max. 660 x 508 mm |
| - min. 297 × 200 mm |
| Control: | - Automatic machine control and information programme |
| * at the feeder, the printing units of the delivery and the control centre |
| - High-Speed Bus System and Controller |
| - STS Sakurai Interactive fully digital control and monitoring system |
| * via touchscreen monitor for operating and monitoring the machine |
| - SCC Sakurai Color Control for remote control of the colour zones |
| - QSS Quick Standby System for Faster Make-Ready Changeovers |
| - SAS Sakurai Auto Set: Automatic format setting |
| * in the feeder the delivery, the side marks and the print provision |
| - CIP3 interface |
| Dampening: | - Sakurai Olivermatic- Alcohol film dampening system with delta effect |
| - Infinitely variable electronic dampening solution control |
| - Delta effect to prevent hickeys |
| - Oscillating bridge rollers |
| - Engageable/disengageable bridge roller |
| - Diagonal Adjustment of the Metering Roller Possible |
| Feeder: | - Stream feeder |
| - Suction belt shed feeder |
| - Feed Head with Separate Lifting and Forwarding Suckers |
| - Diagonal Adjustment of the Drag Suckers |
| - Front lay monitoring with sensor |
| - Adjustable blowing air at the front marks (with cleaning of the sensors) |
| - Mechanical double-sheet detector |
| - Ultrasonic Double-Sheet Detection |
| - Mechanical front lays preset via SAS |
| - Electronic side lay monitoring |
| - Oversheet Control |
| - Manual adjustment of sheet arrival position |
| - Manual and electronic format adjustment possible |
| - Technotrans recirculating cooling unit with automatic alcohol dosing |
| Drying: | - Baldwin IR dryer, water-cooled |
| - Diagonal Adjustment of the Metering Roller Possible |
| Inking unit: | - Stepless adjustment of the colour quantity via screen control |
| - Colour profiles can be saved via the SCC operator control station |
| - Automatic ink unit washing device |
| Plate change: | - Sakurai Plate- Chancher (Semi-automatic plate change) |
| Printing units: | - Double large impression cylinder |
| - Double large transfer cylinder |
| - Chrome-plated precision-mounted plate cylinders |
| - Chrome-plated precision-mounted blanket cylinders |
| - Chrome-plated precision-mounted impression cylinders |
| - Transfer cylinder with anti-marker system |
| - Electronic register adjustment via STS console |
| - Automatic blanket washers (Baldmin Impact) |
| Delivery: | - high-pile delivery |
| - Sheet Smoother |
| - Sheet Counting Device |
| - Anti-Static Device |
| - GRAFIX Powder Spray Unit |
| Air supply: | - Becker pressurised vacuum compressor at the feeder |
| - Orion pressure/vacuum compressor with powder filter at the delivery |
| |
| Condition: | As is |
| Speed: | 4,000 to 16,100 sheets/hr |
| Length: | 7,868 mm |
| Width: | 2,512 mm |
| Height: | 1,796 mm |
| Feeder: | 900 mm |
| Delivery: | 840 mm |
| Weight: | 20,500 kg |
| Power supply: | This machine is switched to 200 V, 50 Hz. |
| * Transformer 200 V, 50 Hz |
| Power input: | 29 kW/h |
| Important: | Observe Your Utility Company's Connection Requirements! |
| CE mark: | The Machine Bears the CE Mark |
| Technical data: | Subject to technical changes and errors regarding the equipment |
| |
| Price: |
On request |
| (exclude VAT) |
